Welcome To Halls Group Ltd Website Welcome To Halls Group Ltd Website Welcome To Halls Group Ltd Website Welcome To Halls Group Ltd Website
We're helping build a better Britain
Welcome To Halls Group Ltd Website Welcome To Halls Group Ltd Website Welcome To Halls Group Ltd Website Welcome To Halls Group Ltd Website
about halls grouphalls group latest newscontact halls grouphalls site mapmain home
Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website

 
Welcome To Halls Group Ltd Website garden productsgarden productsorder formgarden quotationgarden contactprecast
Welcome To Halls Group Ltd Website


make your order with out rustic garden products division







Please note: The Heritage range of slabs, rotunda, stepping stones, coping and garden edging are manufactured from natural materials and colour variations can occur. Colour consistency cannot be guaranteed through manufacturing. Colours reproduced on this website are as accurate as they can be. We would advise the final choice of colours is made from actual products. Halls Group reserve the right to change specifications and designs without prior notice. Concrete products with high cement content may suffer the temporary phenomenon of efflorescence. This is not damaging or detrimental to the performance of the material and responsibility for this occurrence cannot be accepted. Liability in respect of any conditions, warranties, statements and representations made on behalf of the company is limited in accordance with the terms and conditions of sale, copies of which are available on request.



Halls Group Garden Products



Handy Tips from the Halls Group's Professionals

Health & Safety:
When cutting slabs wear goggles. Always wear protective clothing and gloves during handling. All protective clothing and tools are available at our Riverside Road, D.I.Y. Centre.



Cutting:
Hire a powerful cutting tool. Always wear protective safety goggles.



Pointing:
Fill joints with sharp sand or, alternatively, a mix of 8:1 dry sand and cement.



Materials:
To provide a professional finish lay sharp sand 25mm thick over the sub-base 75mm thick. Use builder's sand and cement for mortar mix.



Equipment:
Rubber Hammer (to tap down slabs). Tape Measure. Spirit Level. Plank (for compacting sub-base of sharp sand). Trowel (for mixing mortar). Plywood Mortar Mixing Board (1 metre square approx.) Spacers (pieces of wood to fit between slabs of either 2mm or 5mm thickness). Wood leveller 2 metres length of 2x1 softwood.



Laying Paving Slabs
1 Plan your paved patio area carefully. Mark out the perimeter using string and wooden pegs. Measure the area to be covered and calculate slab content requirements. If unsure, draw out the area to be paved and fill in all the measurements. We will advise on paving requirements from your drawing and measurements.
2 Excavate area to create depth for sub-base material and layer of sharp sand. Sub-base depth 75mm & sharp sand 25mm. Total depth 100mm for the paving slabs foundation. Compact the area using a plank.
3 Create a fall away from buildings for drainage purposes of 1:40 slope and use wooden stakes to establish sub-base surface height and fall-away levels.
4 Mortar: mix one part cement with 5 parts builder's sand. Mix on plywood board. Apply with trowel to each corner and centre point of the paving slab area where it is to be positioned. Cement should be slightly higher than the finishing level.
5 Position slab onto cement. Tap down with rubber hammer to the required finishing level. Check fall-away drainage level using a spirit level on top of a 2 metre softwood leveller.
6 Add spacers (2mm or 5mm) and repeat laying process.
7 Joints should be filled in by pointing at least 24 hours after completion of paving.
DO NOT WALK ON PAVED AREA for 24 hours.
Note: Concrete paving slabs will weather and cause a slight colour change.























Send details of your material requirements and we will supply a quotation within 24 hours



Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Paving Slabs

Paving Slabs

Available in smooth, riven or cobble surface finishes.

Large Trade contracts can also be made to order (subject to quotation and size of order).

Colour:
Invariably colour will prove an important consideration in any part of your design. We have carefully chosen a range of colours designed to complement the aesthetics of any garden or patio area rather than overwhelm the surroundings.

Welcome To Halls Group Ltd Website
  Back to top
Welcome To Halls Group Ltd Website

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Paving Slabs

Paving Slabs

These attractive Rustic Norfolk garden slabs are available in five different sizes and can be ordered in Natural, Sandstone or a Red colour finish.

Size:
600mm x 300mm
675mm x 450mm
450mm x 450mm
450mm x 225mm
300mm x 300mm
225mm x 225mm
Order Code:
PGS 003
PGS 004
PGS 005
PGS 006
PGS 007
PGS 008

All Rustic Norfolk Slabs are 38mm in thickness.

Rustic Norfolk Slabs are perfect for patios, paving, stepping stones, or for surrounding a barbecue or swimming pool area. The variations in size can help enhance large or smaller paved areas by assisting with creativity in patterned finishes.

Welcome To Halls Group Ltd Website
  Back to top
Welcome To Halls Group Ltd Website

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Rustic Cobble Slabs

Rustic Cobble Slabs

Cobble slabs are available in Natural, Red or Sandstone finishes.

Rustic cobble surface slabs can be used in combinations with other surface finishes to create a pattern or unusual garden feature.

Size: 450mm x 450mm x 38mm (thickness)

Welcome To Halls Group Ltd Website
  Back to top
Welcome To Halls Group Ltd Website

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Rustic Cobble Slabs

Rustic Riven Slabs

This slightly roughened surface finish adds character to any pathway, patio or garden feature.

Riven slabs are available in a Natural, Red or Sandstone finish.

Size: 450mm x 450mm x 38mm (thickness).

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Rustic Cobble Slabs

Rustic Smooth Slabs

This classic garden slab is available in Natural, Red or a Sandstone finish.

Size: 450mm x 450mm x 38mm (thickness)

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Circular Stepping Stone Paving Slabs

Circular Stepping Stone Paving Slabs

Circular Stepping Stones can add a distinguished feature or bygone appeal to any area of a garden.

Available in Natural, Red or a Sandstone finish.

Supplied in Riven or Smooth surface finishes.

Riven size:
450mm diameter x 38mm (thickness)

Smooth size:
380mm diameter x 38mm (thickness)

Circle Crescent:
380mm diameter x 38mm (thickness)

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Exposed Aggregate Slab

Solus Panel

Supplied in a size 450mm x 450mm x 38mm (thickness).

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website

Garden Edging/Paving Edging

Create a little extra to the aesthetics you are designing in your garden or patio area.

Garden edging can be supplied in scalloped top, round or flat top, and rope top finishes. Scalloped: available in Natural, Red or a Sandstone finish.

  Flat or Round Top: Available in a Natural finish.
  Rope Top: Supplied in a Natural, Red or Sandstone finish.
  Edging Sizes: Scalloped 600mm x 200mm x 50mm
    Round/Flat Top 900mm x 150mm x 50mm
    Rope Top 450mm x 150mm x 50mm
Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Corner Pillars

Rustic Riven Slabs

Designed to create a professional finish to your garden edging and pathways. Supplied in a Natural, Red or Sandstone finish.

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Rustic Rotunda - Rotary Paving Slabs

Rustic Rotunda - Rotary Paving Slabs

This unique system consists of 9 different shaped paving slabs, which can be used to make quadrants, semi-circles and circles, in a choice of 5 different diameters up to 3.9 metres. NOTE: No. 9 can be used instead of 4 x No.1 as the central paving slab. All Rotary Paving Slabs are manufactured to 38mm thickness

  Order Code Detail
(mm)
Length A
(mm)
WidthB
  PGS 011 Rotary 1 225 315
  PGS 012 Rotary 2 225 225
  PGS 013 Rotary 3 450 350
  PGS 014 Rotary 4 600 475
  PGS 015 Rotary 5 450 600
  PGS 016 Rotary 6 450 450
  PGS 017 Rotary 7 250 450
  PGS 018 Rotary 8 450 450
  PGS 019 Rotary 9 450 diameter
  PGS 002 Rotary 10 450 450
  Available from stock in Natural Grey, Red and Sandstone finish.
Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Pyramid and Pier Pillar Caps

Pyramid and Pier Pillar Caps

Create a distinguished look to an entrance point with these classical pillar caps.

Ideal for gate pillars, wall piers and garden features.

Halls Group manufacture pier pillar tops to suit most brick piers. Please ask for details when making your enquiry by email or telephone.

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Coping

Coping

Wall coping is manufactured in a bevelled or flat-angled surface design.

Supplied in both a Natural or Sandstone finish.

Length: 600mm
Widths: 165mm, 305mm or 355mm widths.

Corner and end weathered designs also supplied.

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Fencing Posts and Gravel Boards

Round and Pyramid Top
Designed and manufactured as slotted posts to readily accommodate fencing panels. Corner posts available.

Large quantities in stock for immediate delivery

  Size of Round Top: 100mm x 125mm
  Size of Pyramid Top: 100mm x 100mm
  Heights: 5 feet to 10 feet
    1525mm to 3050mm

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
Fencing Gravel Boards

Fencing Gravel Boards

Lift the fencing panel above a soil surface to prevent gardening damage and wet rot.

Give your fencing a professional finish which everyone will be proud of.

Surface finish: Smooth or Rock Face

Lengths: 1800mm
1830mm (6 feet)
2400mm
Height: 150mm or 300mm

Welcome To Halls Group Ltd Website
Welcome To Halls Group Ltd Website
  Back to top